A bit of a disclaimer:
The parts listed on this page are
taken from various catalogues, and the manufacturers list the specific
models that each part applies to.
I assume no responsibility for parts that do not fit or perform as advertised.
What I'm saying is that if it don't
work, don't blame me - blame the manufacturer!
|
|
| Part Description | Manufacturer | Part Number | Applications | Footnotes |
| Cowl Hood | Andy Cap | NA | 83-88 T-Bird/Cougar | NA |
| Rear Spoiler | A&A | 1632 | 87-88 T-Bird/Cougar | NA |
| Rear Spoiler | A&A | 1608 | 83-86 T-Bird/Cougar | NA |
| 3-pce Rear Spoiler | A&A | 1605 | 83-86 T-Bird/Cougar | NA |
| Ground Effects Kit | Xenon | 8000 | 83-86 T-Bird/Cougar | NA |
| Ground Effects Kit |
Spoilers.com | 264-1 | 83-86 T-Bird/Cougar | NA |
| Ground Effects Kit |
Spoilers.com | 099 | 87-88 T-Bird | NA |
| Ground Effects Kit |
Spoilers.com | 099A | 87-88 Cougar | NA |
| Ground Effects Kit |
Spoilers.com | 228 | 87-88 T-Bird/Cougar | NA |
| Ground Effects Kit |
Spoilers.com | 268 | 87-88 T-Bird | NA |
| Headlight Covers | GTS | GT205 | 83-86 T-Bird | 1 |
| Headlight Covers | GTS | GT219 | 87-88 T-Bird | NA |
| Headlight Covers | GTS | GT0221 | 87-88 Cougar | NA |
| Bra | Covercraft | MM42172 | 87-88 T-Bird | 2 |
|
|
| Part | Manufacturer | Part Number | Applications | Footnotes |
| Rear Anti Sway Bar | Addco | 288 | 83-88 T-Bird/Cougar | 3 |
| Front Anti Sway Bar | Addco | 504 | 83-88 T-Bird/Cougar | 3 |
| Rear Anti Sway Bar | Addco | 415 | 83-85 T-Bird.Cougar | 4 |
| Front Anti Sway Bar | Addco | 504 | 83-85 T-Bird/Cougar | 4 |
| Rear Anti Sway Bar | Addco | 677S | 83-85 T-Bird/Cougar | 5 |
| Front Anti Sway Bar | Addco | 597 | 83-85 T-Bird/Cougar | 5 |
| 3/4" lowering springs | Ford Racing | M-5300-D | 83-86 T-Bird/Cougar | 6 |
| 1.5" Lowering Springs | Susp. Techniques | 60215 | 83-88 V8 Bird/Cougar | NA |
| 1.5" Lowering Springs | Susp. Techniques | 60220 | 83-88 V6 & 4cyl | NA |
| 1.5" Lowering Springs | Eibach | 3516140 | 83-88 T-Bird/Cougar | 6 |
| Adj. crossmember | Ford Racing | M-5059-A | All Fox exc. Mark VII | 7 |
| 15:1 Rack & pinion | Ford Racing | M-3504-A | All Fox Fords | 8 |
| High Carbon Brake Linings | Ford Racing | M-2001-G | 87-88 Turbocoupe | NA |
| 7.5" Ring & Pinion | Richmond Gear | 4900421 | All 7.5" rear ends | 3.45:1 ratio |
| 7.5" Ring & Pinion | Richmond Gear | 4900431 | All 7.5" rear ends | 3.73:1 ratio |
| 7.5" Ring & Pinion | Richmond Gear | 6903181 | All 7.5" rear ends | 4.10:1 ratio 9* |
| 7.5" Ring & Pinion | Richmond Gear | 6903201 | All 7.5" rear ends | 4.56:1 ratio 9* |
| 7.5" Ring & Pinion | Richmond Gear | 6903481 | All 7.5" rear ends | 5.13:1 ratio 9* |
| Differential Pin | Richmond Gear | 8002711 | Richmond 7.5" gears | See footnote 9 |
| Installation Kit | Richmond Gear | 8310451 | Richmond 7.5" gears | NA |
| Traction Loc 7.5" Diff | Ford Racing | M-4204-C75 | All 7.5" rear ends | 10 |
| Friction Modifier | Ford Racing | M-19546-A | 7.5" Trac Loc | See footnote 10 |
| 7.5" Ring & Pinion | Ford Racing | M-4209-L308 | All 7.5" rear ends | 3.08:1 ratio |
| 7.5" Ring & Pinion | Ford Racing | M-4209-L327 | All 7.5" rear ends | 3.27:1 ratio |
| 7.5" Ring & Pinion | Ford Racing | M-4209-L345 | All 7.5" rear ends | 3.45:1 ratio |
| 7.5" Ring & Pinion | Ford Racing | M-4209-L373 | All 7.5" rear ends | 3.73:1 ratio |
| 7.5: Ring & Pinion | Ford Racing | M-4209-L410 | All 7.5" rear ends | 4.10:1 ratio |
| Trans Kit | TCI | 43600 | All w/AOD trans | NA |
| Shift Improver kit | B&M | 40263 | All w/AOD trans | NA |
| Trans Pak | B&M | 40227 | All w/AOD trans | NA |
| Transpak | Ford Racing | M-7101-F | All w/AOD trans | NA |
| 2400 stall convertor | Ford Racing | M-7902-E | All w/AOD trans | 11 |
| 3000 stall convertor | Ford Racing | M-7902-F | All w/AOD trans | 11 |
| Wide Ratio AOD Kit | Ford Racing | M-7398-D | All w/AOD trans | NA |
|
|
| Part | Manufacturer | Part Number | Applications | Footnotes |
| Painted Headers | Dynomax | 85117 | 86-93 Mark VII | NA |
| Coated Headers | Dynomax | 86117 | 86-93 Mark VII | NA |
| Full Length Headers | Dynomax | 85904 | 83-88 T-Bird/Cougar | 12 |
| Underdrive Pulleys | March | 2015 | 5.0 w/ serpentine belt | NA |
| Lightweight Pulleys | March | 2010 | 5.0 w/serpentine belt | NA |
| Air Filter | K&N | 332015 | 86-88 5.0 SEFI | 13 |
| Billet Distributor | Accel | 60201A | 86-88 5.0 SEFI | NA |
| Cap & Rotor Kit | Accel | 8233 | 5.0 V8 w/EEC-IV | NA |
| Super Coil | Accel | 140008 | 4,6,8 cyl w/EEC-IV | NA |
| Super Coil | Accel | 140009 | V6&V8 w/o EEC-IV | NA |
| 300+ Plug Wires | Accel | 7054 | All V8 | NA |
| Super Stock Wires | Accel | 4054 | All V8 | NA |
| Spiral Core Wires | Accel | 5056 | All V8 | NA |
| 8.8mm Plug Wires | Accel | 8854 | All V8 | NA |
| 9mm Plug Wires Blue | Ford Racing | M-12259-C301 | All V8 | NA |
| 9mm Plug Wires Red | Ford Racing | M-12259-R301 | All V8 | NA |
| 9mm Plug Wires Black | Ford Racing | M-12259-M301 | All V8 | NA |
|
|
| Part | Manufacturer | Part Number | Applications | Footnotes |
| 351W Fox oil pan | Ford Racing | M-6675-A58 | All Fox cars | NA |
| 429/460 Fox oil pan | Ford Racing | M-6675-A460 | All Fox cars | NA |
| 429/460 Fox Eng. Mounts | Ford Racing | M-6038-A460 | All Fox cars | NA |
| 5.0 HO MAF Harness | Ford Racing | M-12071-C302 | see footnotes | 14 |
| 5.0 HO PCM (AOD) | Ford Racing | M-12071-G302 | see footnotes | 14 |
| 5.0 HO PCM (T-5) | Ford Racing | M-12071-F302 | see footnotes | 14 |
| 5.0 HO Eng. Harness w/sensors | Ford Racing | M-12071-E302 | see footnotes | 14 |
| 5.0 HO sensors (other than ones mounted on engine) | Ford Racing | M-12071-D302 | see footnotes | 14 |
| 19lb injectors | Ford Racing | M-9593-C302 | see footnotes | 14 |
|
|
| 1 | Will not fit Cougar due to slightly different headlight covers |
| 2 | Except Turbo Coupe |
| 3 | Without air suspension |
| 4 | With air suspension |
| 5 | Alternate diameter |
| 6 | 4 or 6 cyl - V8 models will be lowered more |
| 7 | Double hump crossmember |
| 8 | Original equipment on all 87-88 models and certain 83-86 Turbo Coupe and XR-7 models |
| 9 | These gears require differential pin #8002711 |
| 10 | Requires additive #M-19546-A or equivalent |
| 11 | Eliminates lockup feature. Should be used with external tramission cooler to prevent overheating and transmission damage. |
| 12 | Will not fit vehicles with AOD transmission |
| 13 | May fit V6 models with SEFI |
| 14 | All of the parts with the footnote "14" are required to convert your 5.0 SEFI to HO Mass Air specs. You will also need HO heads, upper intake manifold, and camshaft. The HO cam will change your firing order. If you plan on using an aftermarket camshaft, you MUST either replace your pistons with HO units or have your existing pistons flycut for valve clearance. Failure to do so will result in piston/valve interference and will really suck! |